Switching between digital and analog audio, Switching between digital and analog, Audio – Sony VPL-5400ES Manuel d'utilisation

Page 102

Advertising
background image

102

GB

Switching between
digital and analog audio

When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.

1

Press the input button.

You can also use INPUT SELECTOR on
the receiver.

2

Press AMP.

3

Press INPUT MODE repeatedly
to select the audio input mode.

The selected audio input mode appears on
the TV screen.
• Auto

Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.

• Analog

Specifies the analog audio signals input
to the AUDIO IN (L/R) jacks.

Notes

• Some audio input modes may not be set up

depending on the input.

• When either HDMI input, satellite tuner or

DIGITAL MEDIA PORT adapter is selected,
“------” appears on the display, and you cannot
select other modes. Select an input mode other than
the HDMI input, satellite tuner and DIGITAL
MEDIA PORT adapter then set the audio input
mode.

• When “2ch Analog Direct” is being used, or the

multi-channel input is selected, audio input is set to
“Analog.” You cannot select other modes.

AMP

Input
buttons

INPUT
MODE

Advertising
Ce manuel est liée aux produits suivants: