Troubleshooting – Samsung NX58F5700WS-AA Manuel d'utilisation

Page 75

Advertising
background image

troubleshooting _75

trou

BL
e

SH
oo
ti

NG

troubleshooting

trouBLeSHootiNG

Samsung works hard to ensure that you don’t have problems with your new gas range.

If you experience a problem, look first for a solution in the table below. If, after trying the

suggested solution, you’re still having trouble, call Samsung at 1-800-SAMSUNG (1-

800-726-7864).

PROBLEM

POSSIBLE CAUSE

SOLUTION

you smell gas.

There is a gas leak.

The surface burner knob is not in

the ‘off’ position, yet the burner

itself is not ignited.

Clear the room, building, or area

of all occupants.

Immediately call your gas

supplier from a neighbor’s

phone. Do not call from your

phone. It is electrical and

could cause a spark that could

ignite the gas. Follow the gas

supplier’s instructions.

If you cannot reach your gas

supplier, call the fire department.

the range is not level.

The appliance has been installed

improperly.

The leveling leg(s) is (are)

damaged or uneven.

Make sure the floor is level,

strong, and stable. If the floor

sags or slopes, contact a

carpenter.

Check and level the range. (See

the Installation Instructions.)

The kitchen cabinets are not

properly aligned and make the

range appear to be not level.

Ensure that cabinets are square

and provide sufficient room for

installation.

the oven control beeps

and displays an error

code.

You have a function error code.

See the “Troubleshooting and

information codes” chart on

page 80.

Press the CLEAR/OFF pad and

restart the oven. If the problem

persists, disconnect all power to

the range for at least 30 seconds

and then reconnect the power. If

this does not solve the problem,

call for service.

All burners do not light.

The power cord is not plugged

into the electrical outlet.

Make sure the electrical plug

is plugged into a live, properly

grounded outlet.

A fuse in your home may be

blown or the circuit breaker

tripped.

Replace the fuse or reset the

circuit breaker.

The gas supply is not properly

connected or turned on.

See the Installation Instructions

that came with your range.

140102_(IB)NX58F5700WS_AA_DG68-00517A-01_EN+CFR.indb 75

02/01/2014 14:58:14

Advertising