Samsung NX58F5700WS-AA - Manuel (Page 59)

maintaining your appliance _59
m
A
iN
tA
iN
iNG
y
our
A
pp
LiAN
ce
Stainless steel surfaces
Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces.
Abrasive pads and cleaners will scratch the surface and damage the surface
finish.
To prevent any discolorations
and/or grease stains, we
recommend cleaning and
removing any spills, spots, and
grease from the range after each
use.
1. Wipe off any spills with a damp,
soft cloth.
2. Apply an approved stainless
steel cleaner to a damp, clean
cloth or paper towel. Clean
a small area carefully following
the instructions on the cleaner.
Stainless steel should always
be cleaned with the grain in the
stainless steel, if applicable.
3. Dry and buff with a clean, dry, soft
cloth.
4. Repeat steps 2 and 3 as necessary.
Do not spray any type of cleaner into the manifold panel holes. Within these
holes are ignition switches which carry the current that lights the surface
burners. Spraying into them could damage the range.
WARNING
WARNING
Stainless steel
surfaces
140102_(IB)NX58F5700WS_AA_DG68-00517A-01_EN+CFR.indb 59 02/01/2014 14:58:04