Taking a photo image(jpeg) on a memory card, Digital still camera mode, Mode digital still camera – Samsung SC-DC564-XAA Manuel d'utilisation

Page 97: English, Français

Advertising
background image

4

Photo capture

ENGLISH

97

FRANÇAIS

Digital Still Camera Mode

Taking a Photo Image (JPEG) on a Memory Card

You may take photo images while in

M.Cam Mode and store the

images on the Memory Card. page 28

You can take photo images using the remote control.

(SC-DC564/DC565 only)

Audio will not be recorded with a photo image onto the Memory

Card.

Please check the protection tab setting on your memory card

before recording. You may not be able to record when it is set to

lock.

1. Insert the Memory Card.
2. Set the

[Mode] switch to [CARD].

3. Set the

[Power] switch to [

(Camera)].

4. After framing your subject, fully press the

[PHOTO] button to take the picture.

The picture is taken and saved into the

Memory Card within a few seconds.

Taking another picture within this interval is

not possible.

The

<Photo capture> indicator appears

during the time it takes to save the

image.

Notes

Saved photo images will appear slightly larger

than what is shown on the LCD screen when

the photos are taken.

Photo images are saved in the Memory Card in an 800x600 or

1152x864 format.

The number of photo images that can be stored depends on the

quality of the image.

Mode Digital Still Camera

Enregistrement d’une image figée (JPEG) sur la carte mémoire

Vous pouvez prendre des images figées en

M.Cam Mode et les

stocker sur la carte mémoire. page 28

Vous pouvez prendre des images figées à l’aide de la

télécommande. (SC-DC564/DC565 uniquement)

La bande sonore d’une image figée n’est pas enregistrée sur la

carte mémoire.

Veuillez vérifier la position de la languette de sûreté de votre carte

mémoire avant d’enregistrer. Si elle est déplacée sur la position de

verrouillage, il est probable qu’il vous sera impossible d’enregistrer.

1. Insérez la carte mémoire.
2. Placez l’interrupteur

[Mode] sur [CARD].

3. Placez l’interrupteur

[Power] sur [

(Camera)].

4. Après avoir cadré votre sujet, appuyez à fond

sur la touche

[PHOTO] pour prendre la photo.

La photo est prise et sauvegardée sur la

carte mémoire en quelques secondes.

Il vous est impossible de prendre une autre

photo durant cet intervalle.

Le témoin

<Photo capture> s’allume pour la

durée de la sauvegarde

Remarques

Les photos sauvegardées apparaîtront un peu

plus grandes que celles vues à l’écran LCD lors

de la prise de photos.

Les photos sont sauvegardées sur la carte

mémoire en format 800x600 ou 1152x864.

La quantité d’images figées stockées sur la

carte mémoire dépend de la qualité d’image.

Advertising
Ce manuel est liée aux produits suivants: