Troubleshooting, Dépannage, English – Samsung SC-DC564-XAA Manuel d'utilisation

Page 120: Français, Self diagnosis display in <camera/player> modes, Écran auto-diagnostic en mode <camera/player

Advertising
background image

ENGLISH

120

FRANÇAIS

Troubleshooting

Troubleshooting

Before contacting a Samsung authorized service center, perform the

following simple checks.

They may save you the time and expense of an unnecessary call.

Self Diagnosis Display in <Camera/Player> Modes

Display

Blinking Informs that...

Action

Slow

The Battery Pack is almost

discharged.

Change to a charged one.

No disc!

Slow

There is no disc in DVD

Camcorder.

Insert a disc.

Disc full!

Slow

There is not enough memory to

record.

Change to a new disc.

Erase recorded image.

error

?

error

Bad Disc!

Slow

Inserted disc is not recognized by

the DVD Camcorder.

Eject and re-insert the disc.

Try another disc.

Format the disc. (DVD-RW/+RW)

Finalized disc!

Slow

The disc is finalized.

To record on a DVD-RW disc,

unfinalize it. Format the disc.

Cover is opened! Slow

Cover is opened.

Close the cover.

Caution

When there is dew condensation, put aside for a while before using

What is Dew Condensation?

Dew condensation happens when a DVD camcorder is moved to a place where there is

a significant temperature difference from the previous place. In other words, the water

vapor in the air turns into dew because of the temperature difference, and it condensates

like dew on the external or internal lenses of the DVD camcorder and on the reflection

lens and the surface of the disc which are related to playback. When this happens, you

temporarily may not use the record or play functions of the DVD camcorder. Also, it may

cause a malfunction or damage to the DVD camcorder when using the device with the

power on while there is dew condensation.

What can I do?

Turn the power off and detach the battery pack, and leave it in a dry area for

1~2 hours before using it.

When does the dew condensation occur?

When the device is relocated to a place with a higher temperature than the previous

location, or when using it in a hot area suddenly, it will cause condensation.

1) When recording outside in cold weather during the winter and then using it

in indoors.

2) When recording outside in hot weather after being indoors or inside a car

where the AC was running.

Dépannage

Dépannage

Avant de contacter un Centre de services de Samsung, faites ces simples vérifications.

Elles peuvent vous épargner du temps et de l’argent pour un appel inutile.

Écran Auto-diagnostic en mode <Camera/Player>

Écran

Clignotant Vous informe de...

Action

Lente

Le bloc-piles est presque à plat. Remplacer avec un bloc-piles

chargé.

No disc!

Lente

Aucun disque dans le

caméscope.

Insérez un disque.

Disc full!

Lente

Espace mémoire insuffisant.

Insérez un nouveau disque.

Effacez l’image enregistrée.

error

?

error

Bad Disc!

Lente

Si le disque inséré n’est pas

reconnu par le DVD caméscope.

Remplacer avec un nouveau

disque.

Supprimez les images enregistrées.

Formatez le disque. (DVD-RW/+RW)

Finalized disc!

Lente

Le disque est finalisé.

Pour enregistrer sur un disque

DVD-RW, vous devez annuler

la finalisation.

Cover is opened! Lente

Le couvercle est ouvert.

Refermez le couvercle.

Attention

Si de la condensation s’est formée, laissez le DVD caméscope de côté pour un moment

Qu’elle est la cause de la condensation ?

La condensation se produit lorsque qu’une caméra vidéo est déplacée dans un endroit

ou la différence de température est marquée comparée à celle du dernier emplacement.

En d’autres mots, les vapeurs d’eau de l’air se condensent en raison de la différence

de température ; elles se condensent come de la rosée sur les objectifs internes et

externes de la caméra vidéo, sur les lentilles de réflection et sur les disques nécessaires

à la lecture. Si cela se produit, il est probable que vous ne pourrez pas utiliser

temporairement votre caméra vidéo pour enregistrer ou pour la lecture.

De plus, cela pourrait produire une dysfonction ou endommager la caméra vidéo lorsque

vous l’utilisez sous tension lorsqu’il y a de la condensation.

Que puis-je faire ?

Mettez la caméra hors tension et enlevez le bloc-piles; rangez-la dans un

endroit sec pour une ou deux heures avant de l’utiliser.

Quand la condensation se produit-elle ?

La condensation se produit lorsque l’appareil est relocalisé en un autre endroit plus chaud

que le dernier emplacement, ou si vous l’utilisez dans un endroit réchauffé rapidement.

1) Lorsque vous enregistrez en extérieur par température froide de l’hiver et

que vous l’utilisez ensuite en intérieur.

2) Lorsque vous enregistrez en extérieur par température chaude en sortant

d’un endroit ou d’une auto climatisée.

Advertising
Ce manuel est liée aux produits suivants: