Important, Installation instructions, Step 9 – position dishwasher under countertop – GE GLDT690DWW Manuel d'utilisation

Page 8: Step 10 – level dishwasher

Advertising
background image

8

Installation Instructions

STEP 9 – POSITION DISHWASHER UNDER COUNTERTOP

•Check to be sure that wires are secure under the

dishwasher and not pinched or in contact with door

springs or other dishwasher components.

TIP: Check tub insulation blanket, if equipped. It should

be positioned so it is not bunched up or interfering with

door springs. Check by opening and closing the door.

•Dishwasher door should be flush with cabinet doors.

Be careful not to dent front panel with knees or damage

countertop or cabinets with dishwasher parts.

Figure 15

Do Not Push Against

Front Door Panel With

Knee. Damage to The

Door Panel Will Occur.

Reposition Dishwasher

by Grasping Both

Sides With Hands

STEP 10 – LEVEL DISHWASHER

IMPORTANT

-

Dishwasher Must

be level for proper dish rack operation and wash

performance.

Place level on

door and rack

track inside the

tub as shown to

check that the

dishwasher is

level.

Figure 16

Check

Level

Side

To Side

Check

Level

Front

to Back

by adjusting the

four leveling legs

individually.

Figure 17

Turn Legs

to Adjust

• Level the dishwasher

TIP: Pull lower rack out, about halfway . Check to

be sure the rack does not roll forward or back into

dishwasher . If the rack rolls in either direction, the

dishwasher must be leveled again.

•If door hits the tub, the dishwasher is not installed

correctly . Adjust leveling legs to align door to tub.

Advertising
Ce manuel est liée aux produits suivants: