GE GLDT690DWW - Manuel (Page 2)

2
Installation Preparation
PARTS SUPPLIED:
 Two #8 Phillips flat head wood screws, 5/8”long
to secure dishwasher to underside of countertop
(in literature package).
2 Wood Screws
MATERIALS YOU WILL NEED:
 Ferrule, compression nut and 90° Elbow (3/8”NPT
external thread on one end, opposite end sized to
fit water supply)
 Thread seal tape
 UL Listed wire nuts (3)
90° Elbow,
Ferrule and
Compression Nut
Hand
Shut-Off
Valve
Thread
Seal Tape
Wire Nuts (3)
Materials For New Installations Only:

Air gap for drain hose, if required

Waste tee for house plumbing, if applicable

Electrical cable or power cord, if applicable

Screw type hose clamps

Strain relief for electrical connection.

Hand shut-off valve

Water line 3/8”min. copper

Coupler for extending drain line, if applicable
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Hot Water line
Air Gap
Screw Type
Hose Clamps
Strain Relief
Coupler
TOOLS YOU WILL NEED:

Phillips head screwdriver

5/16”and 1/4”nutdriver

6” Adjustable wrench

Level

Carpenters square

Measuring tape

Safety glasses

Flashlight

Bucket to catch water when flushing the line

Gloves
For New Installations Only:

Tubing cutter

Drill and appropriate bits

Hole saw set
Screw Driver II
Nutdriver
Crescent Wrench
Level 2
Carpenters Square
Measuring Tape
Safety Glasses
Flashlight
Tubing Cutter
Drill & Bits
Hole Saw Bit
Phillips head
screwdriver
5/16”and
1/4”nutdriver
6” Adjustable
wrench
Level
Carpenters
square
Measuring tape
Safety glasses Flashlight
Bucket
Gloves
Tubing cutter Drill and Bits
Hole saw set