Nova-Tech Floc-Tester ET 750 - Manuel (Page 6)

6 Floc-Tester_ET740_ET750_1 12/2008
GB General notes
Safety Instructions
Before using the unit, please read the operating manual supplied with the apparatus 1 .
carefully .
Do not dispose of this equipment as urban waste . 2 .
In order to prevent possible risk of electric shocks, fire and personal injury when the 3 .
unit is being used, basic safety measures must always be taken, including:
• Do not turn the instrument on before positioning the beakers for protecting
the blades . Ensure that the power switch is turned to “0” (OFF) before
removing the beakers containing the stirring liquid .
• Check that the rating of external power supply corresponds to the rating of
the electric line .
Do not use the unit if it is not working correctly . In case of malfunctioning, 4 .
contact the manufacturer .
Personal protective equipment must be compatible with the possible risks posed by the 5 .
material being processed and the glass parts .
Follow the cleaning instructions described in this manual . 6 .
This unit must only be used for laboratory applications 7 .
The manufacturer declines all responsibility for any use of the unit that does not comply 8 .
with these instructions .
This unit has been designed and produced in compliance with the following standards . 9 .
Safety requirements for electrical apparatus for: 10 .
Measurement and control and for laboratory use CEI EN 61010-1
Electrical equipment for laboratory use UL 3101-1
General requirement – Canadian electrical code CAN/CSA-C22 .2
Note
The manufacturer is committed to constantly improving the quality of the products and •
reserves the right to modify the characteristics without prior notice .