John Wood Condensing - JWC111-DV - Manuel (Page 30)

30
Included Parts List
Remote Controller RC-7650M
Installation Guide
For Installers:
Read this installation guide
carefully before carrying out
installation.
Note
Do not connect power to the water heater before the remote controller has been properly installed.
Recommended installation location of the remote controller is in a bathroom.
Do not disassemble the remote controller.
Wall Packing Connecting Wire
Remote Controller
Phillips Roundhead
Wood Screw
Wall Anchor
Part Name
Remote Controller
Wall Packing
Phillips Roundhead Wood Screw
Wall Anchor
Quantity
1
1
2
2
Notes on the Installation Location
• The remote should be installed in an easily
accessible location.
• Avoid installing in a place where water or
steam can come into contact with the con-
troller.
• Avoid locations where special chemical
agents (e.g., benzene, fatty and oily deter-
gents) are used.
• Avoid outdoor installation, or installation in an
indoor location where it will be exposed to
direct sunlight.
Connection of Remote Controller Cord
White Connector To Remote controller
Y-shaped terminals To Water heater
(two-core)
* Confirm the connection with the labels at
both ends of the remote controller cord.
• A 8m (26') cord can be purchased
separately (Part # RC-CORD26).
• The remote controller cord can be ex-
tended up to 90m (300'). by splicing the
cord and using 18 gauge wire to extend
the cord to the appropriate length.