Menu operations – JVC KW-R600 Manuel d'utilisation

Page 20

Advertising
background image

(Hold)

If no operation is done for about 60 seconds, the
operation will be canceled.

1

2

3 Repeat step 2 if necessary.



To return to the previous menu, press

.



To exit from the menu, press DISP or MENU.

Menu item

Selectable setting (Initial: [XX])

DEMO

For settings,

' page 4.

CLOCK

CLOCK SET
24H/12H
CLOCK ADJ
*1
(Clock
adjustment)

[AUTO]: The built-in clock is synchronized with the clock data received
from the FM Radio Data System station.
OFF: Cancels.

COLOR

For settings,

' page 18.

COLOR SETUP

DIMMER

DIMMER SET

Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *2
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.

BRIGHTNESS

DAY[31]/NIGHT[11]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.

DISPLAY

SCROLL *3

[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.

TAG DISPLAY

[ON]: Shows the TAG information while playing MP3/WMA/WAV tracks.
OFF: Cancels.

PRO EQ

For settings,

' page 19.

AUDIO

FADER *4*5

R06 — F06

[00]: Adjusts the front and rear speaker output balance.

BALANCE *5

L06 — R06

[00]: Adjusts the left and right speaker output balance.

LOUD
(Loudness)

ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.

*1

Takes effect only when clock data is received.

*2

The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.

*3

Some characters or symbols will not be shown correctly (or will be blanked) on the display.

*4

If you are using a two-speaker system, set the fader level to “00”.

*5

This adjustment will not affect the subwoofer output.

Menu operations

Menu operations

20

|

ޓENGLISH

2011/12/21

ޓ1:30:5

KW-R600BT_E_EN

Advertising