JVC KW-R600 - Manuel (Page 14)

Adjustments during a call
Phone volume (00 — 50)
[VOLUME 15]: Volume
adjustments made during a call
will not affect the other
sources.
Microphone level
(01— 03)
[02]: As the number
increases, the microphone
becomes more sensitive.
Noise Reduction and Echo
Cancellation mode:
Turns on/off.
Text message notification
When a text message is received, the unit rings
and “RCV MESSAGE”
#“[Device name]” appears.
 <MSG NOTICE> must be set to <ON>.
(
' page 16)
 You cannot read, edit, or send a message
through the unit.
 This feature is only available on certain phones.
Switching between two connected mobile phones
When two mobile phones are connected to the unit, you can access to both “Hands-Free” menus.
 Press
to enter 1st phone’s “Hands-Free” menu.
 Press
twice to enter 2nd phone’s “Hands-Free” menu.
 Press  to return to 1st phone’s “Hands-Free” menu.
Making a call from the hands-free menu
1 Enter the “Hands-Free” menu.
Refer to the table below
for options.
2 Select a calling method.
3 Select and call the contact (name/phone number).
DIALED Call Select the name/phone number
If the phonebook contains many numbers, you can fast search for the desired
number by turning the control dial quickly, or use Quick Search (
' page 10).
 “NO HISTORY” appears if there is no recorded call history.
 “NO DATA” appears if no entries are found in the Bluetooth device’s
phonebook.
 “SEND P.BOOK MANUALLY” appears if <P.BOOK SEL> is set to
<P.BOOK IN UNIT> or the phone does not support PBAP. (
' page 16)
RECEIVED
MISSED CALL
PHONEBOOK
DIAL NUMBER Enter the phone number to dial.
Call Move the entry position Select number/character
Bluetooth mobile phone
14 | ޓENGLISH
2011/12/21 ޓ1:30:5 KW-R600BT_E_EN