JVC KD-R821 - Manuel (Page 14)

14 ENGLISH
Making a call
1
] Enter “HF Menu” screen.
2
] Select a calling method or make a
setting. (Dialed Calls/ Received Calls/
Missed Calls/ Phonebook/ Dial Number/
Voice/ Settings)
3 If “Dialed Calls/ Received Calls/
Missed Calls/ Phonebook” is selected
in step 2 ...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• “No History Found” appears if there is no
history stored.
• “No Entries Found” or “Send Phonebook
Manually” appears depending on the
“Phonebook Select” settings. (page 15)
If “Dial Number” is selected in step 2 ...
Enter the phone number to dial.
Turn the control dial to select a number
or character (0 – 9, #,
* , +), press
4
/
¢ to move to the entry position.
Once you finished entering the number,
press the control dial to confirm.
If “Voice” is selected in step 2 ...
Speak the name (registered words) you
want to call when “Waiting Voice [Device
name]” appears.
• Press and hold
to activate voice
dial operation directly if only one phone
is connected.
If two phones are connected, pressing
and holding will enter “Phone list”
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• “Not Support” appears if the connected
phone does not support this feature.
Using a Bluetooth mobile phone
To connect/disconnect a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<Bluetooth>, then press to confirm.
3 Turn the control dial to select
<Connect Phone/ Connect Audio> or
<Disconnect Phone/ Disconnect Audio>,
then press to confirm.
4 Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
“Connected [Device name]/ Disconnected
[Device name]” appears when the device is
connected/disconnected.
To delete a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<Bluetooth>, then press to confirm.
3 Turn the control dial to select
<Delete Pairing>, then press to confirm.
4 Turn the control dial to select a device
you want to delete, then press to confirm.
“Delete OK?” appears.
5 Press the control dial to delete the
selection.
“OK” appears when the device is deleted.
To return to the previous menu, press
T/P BACK.
EN02-29_KD-R821BT_003A_f.indd 14 EN02-29_KD-R821BT_003A_f.indd 14 1/26/11 5:09:53 PM 1/26/11 5:09:53 PM