JVC KD-X250BT - Manuel (Page 13)

Receiving a call
To receive a call
When there is an incoming call, the source
automatically changes to Bluetooth Phone mode.
 “RECEIVING” appears on the display, followed
by the phone number or name.
or
 When <AUTO ANSWER> is set to a selected
time, the unit answers incoming call
automatically. (
' page 16)
To reject an incoming call or end a
call
(Hold) or (Hold)
To deactivate/activate hands-free
mode
During a phone conversation...
 Operations may vary according to the
connected Bluetooth device.
Adjustments during a call
Phone volume (00 — 50)
[VOLUME 15]: Volume
adjustments made during a call
will not affect the other
sources.
Microphone level
(01— 03)
[02]: As the number
increases, the microphone
becomes more sensitive.
Echo cancellation
(01 — 10)
[04]: Set the echo
cancellation delay time for
clearer sound.
Text message notification
When a text message is received, the unit rings
and “RCV MESSAGE”#“[Device name]” appears.
 <MSG NOTICE> must be set to <ON>.
(
' page 16)
 You cannot read, edit, or send a message
through the unit.
 To clear the message, press any button.
 This feature is only available on certain phones.
Switching between two
connected mobile phones
When two mobile phones are connected to the
unit, you can access to both hands-free menus.
 Press
to enter 1st phone’s hands-free menu.
 Press
twice to enter 2nd phone’s hands-free
menu.
 Press  to return to 1st phone’s hands-
free menu.
Bluetooth mobile phone
Bluetooth mobile phone
ENGLISHޓ| 13
2012/12/14ޓ17:11:8 KD-X250BT_E_EN