JVC KD-R711 Manuel d'utilisation

Page 26

Advertising
background image

26

ENGLISH

Category

Menu item

Selectable setting, [

Initial:

Underlined

]

AUDIO

FADER *

7

R06 – F06
[ 00 ]

: Adjust the front and rear speaker output

balance.

BALANCE *

8

L06 – R06
[ 00 ]

: Adjust the left and right speaker output

balance.

LOUD
Loudness

LOUD ON

LOUD OFF

: Boost low and high frequencies to produce a

well-balanced sound at a low volume level.

: Cancels.

VOL ADJUST
Volume adjust

VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ]

: Preset the volume adjustment level of

each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.

• Before making an adjustment, select the

source you want to adjust.

• “VOL ADJ FIX” appears on the display if “FM”

is selected as the source.

L/O MODE
Line output
mode

SUB.W

REAR

: Select if the REAR LINE OUT terminals are

used for connecting a subwoofer (through an
external amplifier).

: Select if the REAR LINE OUT terminals are

used for connecting the speakers (through an
external amplifier).

SUB.W FREQ *

9

Subwoofer
cutoff frequency

LOW

MID

HIGH

: Frequencies lower than 72 Hz are sent to the

subwoofer.

: Frequencies lower than 111 Hz are sent to the

subwoofer.

: Frequencies lower than 157 Hz are sent to the

subwoofer.

SUB.W LEVEL *

9

Subwoofer level

SUB.W 00 —
SUB.W 08

: Adjust the subwoofer output level.

[ SUB.W 04 ]

BEEP
Keytouch tone

BEEP ON
BEEP OFF

: Activates the keypress tone.
: Deactivates the keypress tone.

AMP GAIN *

10

LOW POWER

HIGH POWER

: VOLUME 00 — VOLUME 30 (Select if the

maximum power of each speaker is less than
50 W to prevent damaging the speakers.)

: VOLUME 00 — VOLUME 50

*

7

If you are using a two-speaker system, set the fader level to “00.”

*

8

This adjustment will not affect the subwoofer output.

*

9

Displayed only when <L/O MODE> is set to <SUB.W>.

*

10

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the
volume level is set higher than “VOLUME 30.”

EN22-29_KD-R711_003A_5.indd 26

EN22-29_KD-R711_003A_5.indd 26

12/17/09 5:23:35 PM

12/17/09 5:23:35 PM

Advertising