JVC KD-R711 - Manuel (Page 19)

19 ENGLISH
Setting item Selectable setting, [ Initial: Underlined ]
AUTO CNNCT • LAST
• OFF
: The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
: The unit does not connect the Bluetooth device
automatically. Connect the device manually. ( 15)
AUTO
ANSWER • ON
• OFF : The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer
the calls manually. ( 16, 17)
MSG NOTICE • ON
• OFF
: The unit informs you of the arrival of a message by
ringing and displaying “RCV MESSAGE.”
: The unit does not inform you of the arrival of a message.
MIC LEVEL — : Adjust the volume of the microphone connected to the
unit. [ LEVEL 01/02/03 ]
NR/EC MODE • ON
• OFF
: The unit adjusts the Noise Reduction and Echo
Cancelation of the microphone connected to the unit for
clearer sound.
: Cancels.
RING TONE • IN UNIT
• IN PHONE
: The unit rings to alert you when a call/Text Message
comes in.
CALL: Select your preferred ring tone when a call
comes in. [ TONE 1/2/3 ]
MESSAGE: Select your preferred ring tone when a Text
Message comes in. [ TONE 1/2/3 ]
: The unit rings (using the connected phones’ ring tone)
to alert you when a call/Text Message comes in. (The
connected mobile phone rings if it does not support this
feature.)
P. BOOK SEL * 1 • PB IN PHONE
• PB IN UNIT
: The unit browses the phonebook of the connected
phone.
: The unit browses the phonebook registered in the unit.
P. BOOK WAIT — : You can copy the phonebook memory of a mobile
phone into the unit (via OPP).
Enter the PIN code to the unit to transfer the phonebook
into the unit. You can transfer a maximum of 400 numbers.
INITIALIZE • YES
• NO
: Initialize all the Bluetooth settings (including stored
pairing, phonebook, and etc.).
: Cancels.
INFORMATION • MY BT NAME
• MY ADDRESS
• BT SW VER
• PH CNNT DEV *
2
• AU CNNT DEV * 2
: Shows the unit name.
: Shows address of USB Bluetooth Adapter.
: Shows the software version.
: Shows connected phone name.
: Shows connected audio device name.
* 1 Selectable only when the connected phone supports PBAP.
* 2 Displayed only when a Bluetooth phone/audio player is connected.
EN12-21_KD-R711_003A_5.indd 19 EN12-21_KD-R711_003A_5.indd 19 12/17/09 5:24:06 PM 12/17/09 5:24:06 PM