JVC KD-X200 - Manuel (Page 19)

Wiring connection
D D
(B) (A)
D A5
A6
A2
A4
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8 Rear speaker
(left) Green F
Green/black
G
Front speaker
(left) White
F
White/black
G
Front speaker
(right) Gray
F
Gray/black G
Rear speaker
(right) Purple
F
Purple/black G
Black: Earth (ground)
connection
Red: Ignition (ACC)
Orange/white: Car light control
switch
Blue/white: Remote wire
Yellow: Battery
Brown: Mobile phone system
ISO connector
IMPORTANT: A custom wiring harness (separately purchased) which is suitable for your car is
recommended for connection.
Custom wiring harness
(separately purchased) Custom wiring harness
(separately purchased)
If your car does NOT have an ISO terminal If your car has an ISO terminal
Modified wiring 2
or
or
Modified wiring 1
Original wiring
R: Red Y: Yellow
If the unit does not turn on with modified wiring 1,
use modified wiring 2 instead.
You may need to modify the wiring of the supplied
wiring harness
D as illustrated.
For some VW/Audi or Opel (Vauxhall)
automobiles
Aerial terminal
Rear ground
terminal
10 A fuse
Installation/Connection
ENGLISHޓ| 19
2012/12/14ޓ21:13:11 KD-X200_E_EN