JVC KD-X200 - Manuel (Page 12)

Menu item Selectable setting (Initial: [XX])
DEMO For settings, ' page 4.
PRO EQ For settings, ' page 11.
AUDIO
FADER *1 R06 — F06 [00]: Adjusts the front and rear speaker output balance.
BALANCE L06 — R06 [00]: Adjusts the left and right speaker output balance.
BASS BOOST +01/+02: Select your preferred bass boost level.
[OFF]: Cancels.
LOUD
(Loudness) [LOW]/HIGH: Boosts low or high frequencies to produce a well-balanced
sound at a low volume level.
OFF: Cancels.
VOL ADJUST
(Volume adjust) -05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)
BEEP
(Keytouch tone) [ON]/OFF: Activates or deactivates the keypress tone.
TEL MUTING *2
(Telephone
muting) ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]: Cancels.
AMP GAIN
(Amplifier gain) LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
CLOCK
CLOCK SET For settings, ' page 4.
24H/12H For settings, ' page 4.
CLOCK ADJ
(Clock
adjustment) [AUTO]: The built-in clock is synchronized with the Clock Time (CT) data
received from the FM Radio Data System station.
OFF: Cancels.
CLOCK DISP
(Clock display) ON/[OFF]: Activates or deactivates clock display when the unit is turned
off.
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *3
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
BRIGHTNESS *4 DAY/NIGHT: Brightness settings for the display and button illumination for
day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
DISPLAY
SCROLL *5 [ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA/WAV tracks.
OFF: Cancels.
*1 If you are using a two-speaker system, set the fader level to “00”.
*2 This setting does not work if <BT ADAPTER> is selected for <AUX> of <SRC SELECT>.
*3 The illumination control wire connection is required. (' page 19)
*4 Initial: DAY (BUTTON ZONE[25], DISP ZONE[31])/NIGHT (BUTTON ZONE[09], DISP ZONE[12])
*5 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Menu operations
12 |ޓENGLISH
2012/12/14ޓ21:13:11 KD-X200_E_EN