Whirlpool CT14NKXJN00 - Manuel (Page 9)

9
Center Hinge
1. Door Stop
2. Door Stop Screw
3. Center Hinge
4. Hex-Head Hinge Screws
5. Sealing Screws
Bottom Hinge
1. Door Stop
2. Door Stop Screw
3. Bottom Hinge
4. Hex-Head Hinge Screws
Reversing the Door Handles
Cone Screw (Use on Top and Bottom of
Handles)
Countersink Screw
Handle Screw (Use on Front of Handles)
To remove handles:
1. Remove freezer handle assembly as shown. Keep all
parts together.
2. Remove refrigerator handle bottom screw. Pry off
screw cover and remove screw.
3. Remove refrigerator handle assembly as shown. Keep
all parts together.
To reinstall freezer handle:
1. Position freezer handle on the opposite side of the
freezer door and install top two screws.
2. Install the bottom two screws.
3. Tighten all screws.
To reinstall refrigerator handle:
1. Unscrew the hole plug in the refrigerator door and
screw it into place on the opposite side.
2. Position the refrigerator handle on the refrigerator door
and attach it at the top with two screws.
3. Align the lower portion of the handle and attach it to the
refrigerator with one screw.
4. Position screw cover over the screw and push it until it
snaps into place.
1. Plugs
2. Countersink Screws
3. Plug
4. Handle Screw
5. Screw Cover
6. Plug