Remote control unit, Battery installation, Battery replacement – Teac SR-L35CD Manuel d'utilisation

Page 6: Precautions concerning batteries

Advertising
background image

The provided Remote Control Unit allows the unit to
be operated from a distance.
When operating the remote control unit, point it
towards the REMOTE SENSOR on the front panel of
the unit.

<

Even if the remote control unit is operated within
the effective range, remote control operation may
be impossible if there are any obstacles between
the unit and the remote control.

<

If the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly.
Conversely, the other appliances may operate
incorrectly.

Battery Installation

1. Remove the battery compartment cover.

2. Insert two “AAA” (R03, UM-4) dry batteries.

Make sure that the batteries are inserted with
their positive “
+” and negative “_” poles
positioned correctly.

3. Close the cover.

Battery Replacement

If the distance required between the remote control
unit and main unit decreases, the batteries are
exhausted. In this case replace the batteries with
new ones.

Precautions concerning batteries

<

Be sure to insert the batteries with correct positive
“+” and negative “_” polarities.

<

Use batteries of the same type. Never use different
types of batteries together.

<

Rechargeable and non-rechargeable batteries can
be used. Refer to the precautions on their labels.

<

When the remote control unit is not to be used for
a long time (more than a month), remove the
batteries from the remote control unit to prevent
them from leaking. If they leak, wipe away the
liquid inside the battery compartment and replace
the batteries with new ones.

<

Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.

Remote Control Unit

RESET Switch

In the following cases, function buttons may not
work properly.
• When the system is damaged by some electrical

shock.

• When the power is irregular or has electrical

noise.

In these cases, press the RESET switch once or twice
lightly with a pencil or a ball-point pen when the
unit is on.

6

Advertising