Clock adjustment – Teac SR-L35CD Manuel d'utilisation

Page 18

Advertising
background image

18

Clock Adjustment

Press the DISPLAY button to select clock
display.

“:” blinks in the clock display.

<

If the unit is in standby mode, press and hold the
MEMORY/CLOCK ADJUST button for 2 or more
seconds, and continue the procedure from step .

<

Press the STOP button to cancel the time setting.
(In the TUNER mode, press the DISPLAY button.)

Within 4 seconds, press and hold the
MEMORY/CLOCK ADJUST button for 2 or more
seconds.

Press the .m or ,/ button to select
“12H” or “24H”.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJUST button.

If you have selected “12H”, “AM” or “PM”
appears on the display.

4

3

2

3

1

Press the .m or ,/ button to set
the current hour.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJUST button.

Press the .m or ,/ button to set
the current minute.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJUST button to
finish the time setting mode.

The clock starts from 00 second.

<

If the unit is disconnected from the power supply
for more than 3 minutes, the clock and timer
setting will be reset.

<

If the unit is disconnected for less than 3 minutes
the time displayed may not be correct.

8

7

6

5

MEMORY/CLOCK ADJ

DISPLAY

.m,/

Advertising