Pioneer DEH-P6400 - Manuel (Page 33)

Initial Settings
En 33
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press FUNCTION to select AUX .
Press FUNCTION repeatedly until AUX appears
in the display.
2 Select AUX on or off with
5/∞.
Pressing
5/∞ will switch
AUX between on and
off and that status will be displayed (e.g.,
AUX :ON ).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press FUNCTION to select DIM .
Press FUNCTION repeatedly until Dimmer
appears in the display.
2 Select DIM on or off with
5/∞.
Pressing
5/∞ will switch
Dimmer between on
and off and that status will be displayed (e.g.,
Dimmer :ON ).
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press FUNCTION to select BRIGHT .
Press FUNCTION repeatedly until Brightness
appears in the display.
2 Select the desired brightness with
2/3.
• The display shows 0 – 15 .
English
Español
Deutsch
F
rançais
Italiano
Nederlands
07
Section