Adjusting subwoofer settings 31, Adjusting source levels 31, Audio adjustments – Pioneer DEH-P6400 Manuel d'utilisation

Page 31: Adjusting source levels

Advertising
background image

06

Section

Audio Adjustments

En

31

English

Español

Deutsch

F

rançais

Italiano

Nederlands

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.

1 Press

AUDIO

to select the

Sub-W2

.

When the subwoofer output is on, you can
select the

Sub-W2

. Press

AUDIO

until

Sub-W2 80

(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as

50

(Hz) or

125

(Hz).

2 Press

2 or 3 to select cut-off frequency.

Press

2 and

50

(Hz) is displayed. Press

3 and

125

(Hz) is displayed. Only frequencies lower

than those in the selected range are output
from the subwoofer.

3 Press

5 or to adjust the output level of

the subwoofer.
Each press of

5 or ∞ increases or decreases

the level of the subwoofer (e.g.,

+6

to

–6

).

Press

5 or ∞ until you see the desired value

displayed.

Adjusting source levels

SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the

FM tuner, which remains unchanged.

1 Compare the FM tuner volume level with
the level of the source you wish to adjust (e.g.,
built-in CD player).

2 Press

AUDIO

to select

SLA

.

Press

AUDIO

until

SLA

appears in the display.

3 Press

5 or to adjust the source volume.

Each press of

5 or ∞ increases or decreases

the source volume.

SLA +4

SLA –4

is displayed as the source

volume is increased or decreased.

Notes

• Since the FM tuner volume is the control, it is

not possible to apply source level adjustments
to the FM tuner.

• The AM tuner volume level can also be

adjusted with source level adjustments.

• The built-in CD and the multi-CD players are

both set to the same source level adjustment
volume automatically.

• External unit 1 and External unit 2 are set to

the same volume adjustment setting automat-
ically.

Advertising