Pioneer DEH-P6400 - Manuel (Page 29)

Audio Adjustments
En 29
1 Press EQ to select the equalizer.
Press EQ repeatedly to swith between the follow-
ing equalizer.
SUPER BASS — POWERFUL — NATURAL —
VOCAL — CUSTOM1 — CUSTOM2 — FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM1 or
CUSTOM2 .
1 Press AUDIO to select the equalizer mode .
Press AUDIO until EQ Low/EQ Mid/EQ High
appears in the display.
2 Select the equalizer band you want to
adjust with
2/3.
EQ Low (low)— EQ Mid (mid)— EQ High (high)
3 Press
5 or ∞ to adjust the equalizer curve.
Each press of
5 or ∞ increases or decreases
the equalizer curve respectively.
•
+6 – –6 is displayed as the equalizer curve is
increased or decreased.
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.
Fine adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ Low/EQ Mid/EQ High ).
1 Press AUDIO and hold unitil frequency and
the Q factor (e.g., F 80 Q 1W ) appears in the
display.
2 Press AUDIO to select the desired band for
adjustment.
LOW (low)— MID (mid)— HIGH (high)
3 Select the desired frequency with
2/3.
Press
2 or 3 until the desired frequency
appears in the display.
LOW : 40 — 80 — 100 — 160 (Hz)
MID : 200 — 500 — 1 k — 2 k (Hz)
HIGH : 3.15 k—8 k — 10 k — 12.5 k (Hz)
4 Press
5/∞ to select the desired Q factor.
Press
5 or ∞ until the desired Q factor appears
in the display.
2 N — 1 N — 1 W — 2 W
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
06
Section
Level (dB)
Center frequency Frequency (Hz)
Q=2N
Q=2W