Pioneer DEH-P860MP - Manuel (Page 64)

! 20dB ATT  Attenuation (20dB ATT has a
stronger effect than 10dB ATT)
! TEL mute  Muting
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Use MULTI-CONTROL to select WARN.
The function name tag WARN is highlighted.
2 Press MULTI-CONTROL to turn warning
tone on.
Warning tone :ON appears in the display.
# To turn warning tone off, press
MULTI-CONTROL again.
Using the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
You can turn the feature demo on or off.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
1 Use MULTI-CONTROL to select DEMO.
The function name tag DEMO is highlighted.
2 Press MULTI-CONTROL to turn the fea-
ture demo on.
Demonstration :ON appears in the display.
# To turn the feature demo off, press
MULTI-CONTROL again.
Using reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.
! Some entertainment displays may not oper-
ate the reverse mode.
1 Use MULTI-CONTROL to select REV.
The function name tag REV is highlighted.
2 Press MULTI-CONTROL to turn the re-
verse mode on.
Reverse mode :ON appears in the display.
# To turn the reverse mode off, press
MULTI-CONTROL again.
Switching the font
There are two kinds of fonts to select from.
1 Use MULTI-CONTROL to select FONT.
The function name tag FONT is highlighted.
2 Press MULTI-CONTROL to select the de-
sired font.
Pressing MULTI-CONTROL repeatedly will
switch between Type1 (type 1) and Type2
(type 2) and that status will be displayed.
Switching the Ever Scroll
When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Use MULTI-CONTROL to select SCROLL.
The function name tag SCROLL is highlighted.
Initial Settings
En
64
Section
12