Using the auto-equalizer, Recalling equalizer curves 56, Adjusting equalizer curves 56 – Pioneer DEH-P860MP Manuel d'utilisation

Page 56: Recalling equalizer curves, Adjusting equalizer curves, Audio adjustments

Advertising
background image

4 Push MULTI-CONTROL left or right to

select cut-off frequency.

Each pushing MULTI-CONTROL left or right

selects cut-off frequencies in the following

order:

506380100125160200 (Hz)

Only frequencies higher than those in the se-

lected range are output from the rear speak-

ers.

5 Push MULTI-CONTROL up or down to

adjust the output level of the rear speak-

ers.

Each pushing MULTI-CONTROL up or down

increases or decreases the level of the rear

speakers. ±0  24 is displayed as the level is

increased or decreased.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on page 59).

You can turn the auto-equalizer on or off.

1 Use MULTI-CONTROL to select

AUTO-EQ.

The function name tag AUTO-EQ is high-

lighted.

# Please set Auto EQ appears. This indicates
that you cannot turn the auto-equalizer on if auto
TA and EQ has not been carried out.

2 Press MULTI-CONTROL to turn the auto-

equalizer on.

Auto EQ ON appears in the display.

# To turn auto-equalizer off, press
MULTI-CONTROL again.

Recalling equalizer curves

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

FLAT

Flat

CUSTOM1

Custom 1

CUSTOM2

Custom 2

SUPER BASS Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves that you create. Adjust-

ments can be made with a 13-band graphic

equalizer.

! When FLAT is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

SUPER BASSPOWERFULNATURAL

VOCALFLATCUSTOM1CUSTOM2

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of FLAT, can be adjusted to a fine

degree (nuance control).

Audio Adjustments

En

56

Section

11

Advertising