Introduction of advanced xmtuner, Operation 40, Switching the xmdisplay 40 – Pioneer DEH-P860MP Manuel d'utilisation

Page 40: Storing and recalling broadcast stations 40, Swiching the xmchannel select setting 40, Introduction of advanced xm tuner operation, Switching the xm display, Storing and recalling broadcast stations, Swiching the xm channel select setting, Xm tuner

Advertising
background image

Introduction of advanced

XM tuner operation

1

2

1 Function name tag

Shows the function currently selected in

highlighted manner.

2 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the

main menu.

FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to

select.

SEEK MODE appears on the display.

# To return to the channel display, press
BAND/ESC.

Note

If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.

Switching the XM display

% Press DISPLAY to switch the XM display.

Each press of DISPLAY changes the XMdis-

play in the following order:

Channel nameArtist name/featureSong/

program titleChannel category

Storing and recalling

broadcast stations

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

stations for later recall with the touch of a

button.

% When you find a station that you want

to store in memory press one of preset tun-

ing buttons 16 and hold until the XM pre-

set number stops flashing.

The number you have pressed will flash in the

XMpreset number indicator and then remain

lit. The selected station has been stored in

memory.

The next time you press the same preset tun-

ing button the station is recalled from mem-

ory.

Notes

! Up to 18 stations, six for each of three XM

bands can be stored in memory.

! You can also recall stations assigned to preset

tuning buttons 16 by pushing
MULTI-CONTROL up or down.

Swiching the XM channel

select setting

You can switch if you select a channel with a

channel number or from a channel category

when you select a channel.

% Press CLOCK and hold to switch the

channel select setting.

Press CLOCK and hold repeatedly to switch

between the following channel select settings:

Channel Number (channel number select set-

ting)Category (channel category select

setting)

# You can also switch the XMchannel select
setting in the menu that apears by using
MULTI-CONTROL.

XM tuner

En

40

Section

08

Advertising