Tv tuner, Watching the tv tuner 42, Storing and recalling broadcast stations 42 – Pioneer DEH-P860MP Manuel d'utilisation

Page 42: Watching the tv tuner, Storing and recalling broadcast stations

Advertising
background image

Watching the TV tuner

3

1 2

You can use this unit to control a TV tuner,

which is sold separately.

For details concerning operation, refer to the

TV tuners operation manuals. This section

provides information on TV operations with

this unit which differs from that described in

the TV tuners operation manual.

1 Preset number indicator

Shows which preset has been selected.

2 Band indicator

Shows which band the TV tuner is tuned to.

3 Channel indicator

Shows which channel the TV tuner is tuned.

1 Press SOURCE to select the TV.

Press SOURCE until you see Television dis-

played.

2 Press BAND/ESC to select a band.

Press BAND/ESC until the desired band is dis-

played, TV1 or TV2.

3 To perform manual tuning, push

MULTI-CONTROL left or right.

The channels move up or down step by step.

4 To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one

second and release.

The tuner will scan the channels until a broad-

cast strong enough for good reception is

found.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.

Storing and recalling

broadcast stations

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

stations for later recall with the touch of a but-

ton.

% When you find a station that you want

to store in memory press one of preset tun-

ing buttons 16 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected station has been stored in mem-

ory.

The next time you press the same preset tun-

ing button the station is recalled from mem-

ory.

Notes

! Up to 12 stations, six for each of two TV bands

can be stored in memory.

! You can recall preset channels P01P12 by

pushing MULTI-CONTROL up or down.

! You can also store the station in memory by

using the preset channel list. (Refer to Select-
ing stations from the preset channel list on the
next page.)

TV tuner

En

42

Section

09

Advertising