Pioneer SX-SW260 - Manuel (Page 34)

Additional information 09
34
En
Error Messages
Auto tuning does not
pick up some stations. • The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more
sensitive tuning, connect an outdoor antenna.
Problem Remedy
Message Description
2CH ONLY • An operation is prohibited because it is only applicable to 2 channel sources, while the current
source is a multichannel source.
96K • An operation is prohibited because the source is 96 kHz digital.
MUTING • An operation is prohibited because the sound is muted (press MUTE ).
EXIT • Appears when a menu is automatically exited after a set period of inactivity.
NOISY • Background noise is too high to complete MCACC setup successfully.
ERR MIC • An error occurred during MCACC setup because the microphone is not connected or is not
connected properly.
ERR SP • An error occurred during MCACC setup because the speakers are not connected or are not
connected properly.
EEP ERROR • Contact your Pioneer authorized service center or your dealer for servicing.
NO SPTYP • Try switching the unit off then on again. If the error still appears, please contact a Pioneer
authorized service center or your dealer.
SX-SW260_KU.book Page 34 Wednesday, March 29, 2006 2:43 PM