Philips Golite Blu HF3332/60 - Manuel (Page 14)

, The timer on-indication and the timer countdown time start to
flash (Fig. 11).
3 Press the plus or minus button to set the session time. If you keep
the button pressed, the time moves forward or backward
quickly (Fig. 9).
You can set a time from 1 to 60 minutes.
, The set session time is stored in the memory.
, The timer-on indication and the timer countdown time stop
flashing.
Note: When you turn on the appliance, the timer counts down the set time.
When the countdown is finished, the LED panel turns off automatically.
demo mode
The demo mode is used to demonstrate the goLITE BLU energy light in
stores. When the appliance is turned on in demo mode, customers of the
store can:
- adjust the light intensity
- turn the appliance on and off
- set the alarm
- set the light time
If the appliance is not operated for 3 minutes, it reverts to its demo
mode default settings.
To activate the demo mode:
1 Make sure the appliance is turned off.
Note: If you want to turn off the appliance, press and hold the on/off button
for 2 seconds.
2 Put the adaptor in the wall outlet and insert the appliance plug into
socket on the appliance.
3 Press and hold the on/off button for 10 seconds (Fig. 6).
, The appliance turns on and the word ‘DEMO’ appears on the
display.
, The LED panel goes on at a light intensity of 25%.
EnglisH 14
4222.002.7504.1.indd 14 29-05-09 15:56