Pioneer HTZ-360DV - Manuel (Page 32)

Other connections 08
32
En
Connecting the S-video output
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
• Use an S-video cable to connect the S-
VIDEO OUT to an S-video input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard or S-video
video outputs for a better quality picture. 1
• Use a component video cable to connect
the COMPONENT VIDEO OUT to a set of
component inputs on your TV.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
2
R
L
FRONT
SURROUND
S-VIDEO
VIDEO
COMPONENT
VIDEO
C R /
P R
C B /
P B
Y
AUDIO IN
LINE
VIDEO OUT
TV
S-VIDEO
INPUT
Note
1 The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 26.
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
Ω
R
L
S-VIDEO
VIDEO
COMPONENT
VIDEO
C R /
P R
C B /
P B
Y
VIDEO OUT AUDIO IN
LINE
TV
COMPONENT
INPUT
XV-DV360.book 32 ページ ２００６年２月２４日 金曜日 午前１１時５９分