Pioneer HTZ-360DV - Manuel (Page 26)

Initial Settings menu 07
26
En
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press DVD/CD .
2 With playback stopped, press HOME
MENU and select ‘Initial Settings’.
3 Use / / / and ENTER to select the
setting and option you want to set.
All the settings and options are explained on
the following pages. 1
Video Output settings
Note
1 • In the table, the default setting is shown in bold : other settings are shown in italics .
• Some settings, such as TV Screen , Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible
component using the HDMI connector.
Initial Settings
Setting Option What it means
TV Screen
(See also Screen sizes
and disc formats on
page 39.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
HDMI Resolution
(See Connecting using
HDMI on page 33.)
1920x1080i Set if your TV supports 1920 x 1080 pixel interlace video.
1280x720p Set if your TV supports 1280 x 720 pixel progressive-scan video.
720x480p Set if your TV supports 720 x 480 pixel progressive-scan video.
720x480i Set if your TV supports 720 x 480 pixel interlace video.
HDMI Color
(See Connecting using
HDMI on page 33.)
* Default changes
depending on device
connected.
Full range RGB If colors are weak, this gives brighter colors and deeper black
(default setting for HDMI-compatible DVI devices).
RGB Use this setting if colors appear overly rich on the Full Range
RGB setting.
Component Outputs 8-bit component video format (default setting for
HDMI-compatible devices).
XV-DV360.book 26 ページ ２００６年２月２４日 金曜日 午前１１時５９分