Panasonic DVD-LV57 - Manuel (Page 15)

15
RQT6077
Basic
Operations
CD VCD DVD
Note
≥ If “
$
” appears on the screen
≥ The operation is prohibited by the unit or
disc.
≥ When the disc ends
≥ If you have finished using the unit, turn it
off to conserve power (
➡ page 14, “To
turn the unit off”).
≥ The surface of the unit may become
warm if it is used for a long time, but this
is normal and not an indication of mal-
function.
≥ The disc is still spinning while a menu is
on screen. Press [
∫ ] if you have finished
viewing.
≥ The [ Í ] indicator on the unit flashes to
indicate the unit is on when the monitor’s
mode is set to “4 (Off)” (
➡ page 21) or
the outer cover is closed.
≥ You cannot use the remote control to
turn the unit on when it is being pow-
ered by the battery pack.
≥ To prevent accidental operation
Slide [HOLD] to the left.
≥ In the hold mode, the unit does not
respond when you press the buttons. If
you press a button in the hold mode,
“
'
” appears on the unit’s display
and the [ Í ] indicator flashes.
≥ To release:
≥ Slide [HOLD] to the right.
HOLD
Resume function
The position you stopped play at is
recorded by the unit when the “RESUME”
indicator lights on the unit’s display.
While “RESUME” indicator lights on the
unit’s display, press [
1 ] (play) to start
play from where you stopped it (Resume
function).
The following display also appears.
Pressing [ 1 ] (play) while the message is
displayed, the beginning portions of each
chapter up to the current one are played
and full play resumes from the point
where you stopped play. (Chapter
Preview) (Chapter Preview feature works
only within a title.)
If you do not press [ 1 ] (play), the mes-
sage disappears and play starts from
where you stopped it.
∫ To cancel
Press [ ∫ ].
Note
≥ The resume function does not work if the
disc’s play time is not displayed.
≥ It is cleared if you open the disc lid.
DVD
Press PLAY to Preview Chapters
RESUME
Playing CD-R and CD-RW
This unit can play CD-DA (digital audio) and video CD format audio CD-R and
CD-RW that have been finalized
§ upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the condition of the
recording.
§ Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R
and CD-RW.