Adjusting loudness 41 using subwoofer output 41, Adjusting subwoofer settings 41, Audio adjustments – Pioneer DEH-P8400MP Manuel d'utilisation

Page 41: Adjusting loudness, Using subwoofer output

Advertising
background image

Audio Adjustments

En

41

Each press of

5 or ∞ increases or decreases

the treble level.

+6

–6

is displayed as the level

is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1 Press

OPEN

to open the front panel.

2 Press

AUDIO

to select

Loud

.

Press

AUDIO

until

Loud

appears in the display.

3 Press

5 to turn loudness on.

Loudness level (e.g.,

Loud Mid

) appears in the

display.

4 Press

2 or 3 to select the level.

Press

2 or 3 until the desired level appears in

the display.

Low

(low)—

Mid

(mid)—

High

(high)

5 Press

to turn loudness off.

Loud OFF

appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.

1 Press

OPEN

to open the front panel.

2 Press

AUDIO

to select

Sub-W1

.

When the subwoofer controller setting is

S.W

Control:EXT

, you can select

Sub-W1

. Press

AUDIO

until

Sub-W1

appears in the display.

3 Press

5 to turn subwoofer output on.

Sub-W1 Normal

appears in the display.

Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.

4 Press

2 or 3 to select the phase of sub-

woofer output.
Press

2 to select reverse phase and

Rev.

appears in the display. Press

3 to select normal

phase and

Normal

appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.

1 Press

OPEN

to open the front panel.

2 Press

AUDIO

to select

Sub-W2

.

When the subwoofer output is on, you can
select

Sub-W2

. Press

AUDIO

until

Sub-W2 80

(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as

50

(Hz) or

125

(Hz).

3 Press

2 or 3 to select cut-off frequency.

Press

2 or 3 until the desired cut-off frequency

appears in the display.

50

80

125

(Hz)

• Only frequencies lower than those in the
selected range are output from the subwoofer.

4 Press

5 or to adjust the output level of

the subwoofer.
Each press of

5 or ∞ increases or decreases

the level of the subwoofer.

+6

–6

is displayed

as the level is increased or decreased.
Press

5 or ∞ until you see the desired value

displayed.

English

Español

Deutsch

F

rançais

Italiano

Nederlands

07

Section

Advertising