Pioneer DEH-P8400MP - Manuel (Page 14)

Before You Start
About the demo mode
This product features three demonstration
modes:
Reverse mode , Feature DEMO and
Motion DEMO .
Reverse mode
If you do not perform an operation within about
30 seconds, screen indications start to reverse,
and then continue reversing every 10 seconds.
Pressing 5 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON cancels the
Reverse mode .
Pressing 5 numbered button again to start the
Reverse mode .
Feature DEMO
Pressing 4 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON starts the
Feature DEMO .
Motion DEMO
Pressing 6 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON starts the
Motion DEMO . If
the Motion DEMO is set to ON, front panel
opens/closes automatically in each about 30
minutes.
Notes
• Remember that if the Feature DEMO or Motion
DEMO continues operating when the car
engine is switched off, it may drain battery
power.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.
• Feature DEMO and Motion DEMO are set to
OFF initially. If you turn off the ignition switch
or power to this product is switched off,
Feature DEMO and Motion DEMO return to off
automatically.
En 14
01
Section