Pioneer DEH-P8400MP - Manuel (Page 25)

MP3/WMA Player
En 25
• There is sometimes a delay between starting
up playback and the sound being issued. This
is particularly the case when playing back
multi-session and many folders. When being
read in,
Format Read is displayed.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
• Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
• When playing back files recorded as VBR
(Variable Bit Rate) files, the play time will not
be correctly displayed if fast-forward or
reverse operations are used.
• If inserted disc contains no files that can be
played back, No Audio is displayed.
• There is no sound on fast-forward or reverse.
• If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11 may
be displayed. Refer to Understanding built-in
CD player error messages on page 55.
Introduction of advanced built-in
CD player (MP3/WMA) operation
1 FUNCTION display
Shows the function status.
1 Press OPEN to open the front panel.
2 Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch between
the following functions:
PMODE (repeat play)— RDM (random play)—
SCAN (scan play)— PAUSE (pause)
• To return to the playback display, press BAND .
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
1
English
Español
Deutsch
F
rançais
Italiano
Nederlands
05
Section