Pioneer DEH-P8MP - Manuel (Page 38)

Watching the TV tuner
1 2
3
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuners operation manuals. This section
provides information on TV operations with
this unit which differs from that described in
the TV tuners operation manual.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows which preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
Press SOURCE until you see Television dis-
played.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV1 or TV2.
3 To perform manual tuning, push
Multi-Control left or right.
The channels move up or down step by step.
4 To perform seektuning, push and hold
Multi-Control left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
Multi-Control left or right.
# If you push and hold Multi-Control left or
right you can skip broadcasting channels. Seek
tuning starts as soon as you release
Multi-Control.
TV tuner
En
38
Section
08