Pioneer DEH-P8MP - Manuel (Page 18)

% Push Multi-Control up or down to recall
radio station frequencies.
Pushing Multi-Control up or down selects the
preset tuning number. P1  P6 is displayed as
the preset tuning number is selected.
The radio station frequency assigned to the
preset tuning number is recalled from mem-
ory.
# If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Note
You can also recall radio station frequencies as-
signed to preset tuning numbers by pressing one
of the preset tuning buttons 16 on the remote
control.
Storing the strongest
broadcast frequencies
BSM(best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16 and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Use Multi-Control to select BSM.
BSM appears in the display.
2 Press Multi-Control to turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning numbers 16 in the
order of their signal strength. When finished,
the preset channel list appears.
# To cancel the storage process, press
Multi-Control.
3 Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
# You can also change the station by pushing
Multi-Control up or down.
Note
Storing broadcast frequencies with BSMmay re-
place broadcast frequencies you have saved
using buttons 16.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2 Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
# You can also change the station by pushing
Multi-Control up or down.
# If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use Multi-Control to select Local.
Local appears in the display.
2 Press Multi-Control to turn local seek
tuning on.
Local seek sensitivity (e.g., Local 2) appears in
the display.
Tuner
En
18
Section
04