Pioneer DEH-P8MP - Manuel (Page 21)

Introduction of advanced
built-in CD player operation
1
1 Function display
Shows the function status.
1 Press Multi-Control to display the main
menu.
FUNCTION and AUDIO appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
Repeat (repeat play)Random (random play)
Scan (scan play)Pause (pause)FF/REV
(search method)Tag Read (tag display)
COMP/BMX (compression and BMX)disc
title input
# You can also switch between the functions in
the reverse order by turning Multi-Control coun-
terclockwise.
# To return to the playback display, press BAND.
Notes
! When playing audio data (CD-DA), tag display
is not effective even if you turn Tag Read (tag
display) on. (Refer to page 28.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Use Multi-Control to select Repeat.
Repeat appears in the display.
2 Press Multi-Control to turn repeat play
on.
Repeat :ON appears in the display. The track
currently playing will play to the end and then
repeat.
# To turn repeat play off, press Multi-Control
again.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Use Multi-Control to select Random.
Random appears in the display.
2 Press Multi-Control to turn random
play on.
Random :ON appears in the display. Tracks
will play in a random order.
# To turn random play off, press Multi-Control
again.
Built-in CD Player
En
21
English
Section
05