Xm radio messages, Resetting the main unit, Switching the speaker impedance – Pioneer VSX-816 Manuel d'utilisation

Page 63: Additional information 13

Advertising
background image

Additional information

13

63

En

English

Français

Deutsch

Nederlands

Italiano

Español

XM radio messages

Resetting the main unit

Use this procedure to reset all the receiver’s
settings to the factory default. Use the front
panel controls to do this.

1

Switch the receiver into standby.

2

While holding down the TONE button,

press and hold the

STANDBY/ON button for

about three seconds.

3

When you see RESET? appear in the

display, press

ENTER

.

OK?

shows in the display.

4

Press

SETUP

to confirm.

OK

appears in the display to indicate that the

receiver has been reset to the factory settings.

Switching the speaker
impedance

We recommend using speakers of 8

with this

system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6

impedance rating.

With the receiver in standby, press

STANDBY/ON

while holding down the

SPEAKERS

button.

Each time you do this, you switch between the
impedance settings:

SP 6 OHM

– Use this setting if your

speakers are rated at 6

.

SP 8 OHM

– Use this setting if your

speakers are rated at 8

or more.

Symptom

Cause

Action

Check Antenna

The XM antenna is not connected.

Check that the XM antenna cable is attached
securely.

XM ANT ERR

A short-circuit occurring in the antenna or
surrounding antenna cable.

Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off
then back on again.

Updating

The radio is being updated with the latest
encryption code.

Wait until the encryption code has been
updated. Channels 00 and 01 should function
normally.

No Signal

The XM signal is too weak at the current location.

n/a

Loading

The receiver is acquiring audio or program
information.

Wait until the information has been received.

Off Air

The channel currently selected has stopped
broadcasting.

Select another channel.

CH– – –

You have selected a channel that does not exist,
or that you have not subscribed to.

The receiver will automatically switch to channel
001 (or the last selected channel).

– – – – – – – –

There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.

No action needed.

VSX_816.book.fm 63 ページ 2005年12月8日 木曜日 午後6時54分

Advertising