Pioneer VSX-816 - Manuel (Page 24)

Controls and displays 05
24
En
DIGITAL – Lights when a digital audio
signal is detected.
2 DIGITAL – Lights when a Dolby Digital
encoded signal is detected.
ANALOG – Lights when an analog signal is
detected.
DTS – Lights when a source with DTS
encoded audio signals is detected.
2
When the STANDARD mode is on, this lights
to indicate decoding of a DTS multichannel
signal.
3 2 DIGITAL
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
4 2 PRO LOGIC II x
When the ( STANDARD ) Pro Logic II mode of
the receiver is on, 2 PRO LOGIC II lights to
indicate Pro Logic II decoding. 2 PRO LOGIC
II x lights to indicate Pro Logic IIx decoding (see
Listening in surround sound on page 28).
5 VIR.SB
Lights during Virtual surround back
processing (page 31).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see Auto playback
on page 28) or XM Surround (page 53) is on.
8 ATT
Lights when ANALOG ATT is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the sleep mode is active (see
Remote control below).
10 Tuner indicators
– Lights when the mono mode is set
using the MPX button.
– Lights when a stereo FM broadcast is
being received in auto stereo mode.
– Lights when a broadcast is being
received.
11 Speaker indicators
Lights to indicate the current speaker system,
A and/or B (page 54).
12 Character display
13 Neo:6
When the ( STANDARD ) Neo:6 mode of the
receiver is on, this lights to indicate Neo:6
processing.
14 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
15 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
16 MIDNIGHT
Lights during Midnight listening (page 32).
17 D.E.
Lights when Dialog Enhancement ( DIALOG E)
is switched on (page 32).
18 LOUDNESS
Lights during Loudness listening (page 32).
19 EX
Lights when a Dolby Digital Surround EX
encoded signal is detected.
20 Master volume level
Shows the overall volume level.
21 MCACC channel EQ / Sound Retriever
indicators
These indicators show the EQ balance for each
channel in Checking your Acoustic Calibration
EQ settings on page 39. Also,
L and R light
when the Sound Retriever is active (page 32).
VSX_816.book.fm 24 ページ ２００５年１２月８日 木曜日 午後６時５４分