Pioneer VSX-816 - Manuel (Page 28)

Listening to your system 06
28
En
Chapter 6:
Listening to your system
Important
• Certain features explained in this section
will not be possible depending on the
source (for example, PCM 88.2 / 96 kHz,
DTS 96 kHz (24 bit) or WMA 9 Pro sources).
Auto playback
The simplest, most direct listening option is the
Auto Surround feature. With this, the receiver
automatically detects what kind of source
you’re playing and selects multichannel or
stereo playback as necessary.
1
• While listening to a source, press AUTO
SURR for auto playback of a source.
Press repeatedly until
AUTOSURR. shows
briefly in the display (it will then show the
decoding or playback format). Check the
digital format indicators in the display to see
how the source is being processed.
• When listening to XM Radio, AUTO SURR
selects the XM Surround feature (page 53).
Listening in surround sound
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you’re listening to.
If you connected surround back speakers, see
also Using surround back channel processing
on page 31.
2
The following modes provide basic surround
sound for stereo and multichannel sources.
• While listening to a source, press
STANDARD.
If necessary, press repeatedly to select a
listening mode.
• If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display. 3
With two channel sources, you can select from:
• 2 Pro Logic IIx MOVIE – Up to 7.1
channel sound, especially suited to movie
sources
• 2 Pro Logic IIx MUSIC – Up to 7.1
channel sound, especially suited to music
sources
• 2 Pro Logic IIx GAME – Up to 7.1
channel sound, especially suited for video
games
• 2 PRO LOGIC – 4.1 channel surround
sound (sound from the surround speakers
is mono)
• Neo:6 CINEMA – 6.1 channel sound,
especially suited to movie sources
Note
1 • Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening
in surround sound above for more on these decoding formats).
• The Auto Surround feature is canceled if you connect headphones or select the multichannel analog inputs.
AUTO SURR STANDARD ADV.SURR STEREO
2 If surround back processing (page 31) is switched to OFF, or the surround back speakers are set to NO (this happens auto-
matically if the Surround back speaker setting on page 34 is set to anything but Normal (SB)), 2 Pro Logic IIx becomes 2 Pro
Logic II (5.1 channel sound).
3 If surround back processing (page 31) is switched to
OFF, or the surround back speakers are set to NO (page 40), 2 Pro Logic
IIx becomes 2 Pro Logic II (5.1 channel sound).
AUTO SURR STANDARD ADV.SURR STEREO
05_playing_sources.fm 28 ページ ２００５年１２月１４日 水曜日 午後３時１２分