Pioneer Blu-ray 3D Player BDP-52FD - Manuel (Page 59)

59
En
08
• No sound is output.
• Sound is not output
properly.
Is the disc played back in
slow motion?
Is the disc played back in fast
forward or fast reverse?
No sound is output during slow motion play and forward and reverse
scanning.
Are the audio cables properly
connected? • Connect the cable properly according to the connected devices
(page 16).
• Insert the cable firmly and all the way in.
Is the audio cable damaged? If the cable is damaged, replace it with a new one.
Is Audio Output properly
set?
Set Audio Output properly, according to the connected device
(page 42).
Are the connected
components (AV receiver or
amplifier, etc.) properly set? Read the operating instructions for the connected components and
check the volume, input, speaker settings, etc.
Are you trying to listen to the
sound of the
HDMI OUT
terminal while watching the
picture from the
VIDEO
output terminals?
Audio signals are not output from the HDMI OUT terminal when video
signals are being output from the VIDEO output terminals. When
watching the picture of the VIDEO output terminals, connect an optical
digital audio cable or regular audio cables to listen to the sound
(page 21). Once connections are completed, use
Setup Navigator to
make the player’s settings (page 24).
Is HDMI Audio Out properly
set?
Set HDMI Audio Out to Re-encode or PCM. (page 43).
Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI
device is connected. Connect the device to a DIGITAL OUT terminal or
the AUDIO OUT terminals (page 21).
For some BDs, audio signals are only output from DIGITAL OUT
terminal or the HDMI OUT terminal.
For the BDP-53FD:
Is the
HDMI Mode set
appropriately?
Set the HDMI Mode properly, according to the connected device
(page 43).
Multi-channel sound is not
output. Is the audio output of the
connected AV receiver or
amplifier, etc., properly set? Read the operating instructions for the connected AV receiver or
amplifier and check the audio output settings of the AV receiver or
amplifier.
Is multi-channel sound
selected? Use the menu screen or AUDIO to switch the disc’s sound to multi-
channel.
Noise can be heard when
outputting DTS Digital Audio
signals from the
DIGITAL
OUT terminal.
Is the connected AV receiver
or amplifier compatible with
DTS Digital Surround? If an AV receiver or amplifier that is not compatible with DTS Digital
Surround is connected to the
DIGITAL OUT terminal, set Digital
Output to PCM (page 42).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT terminal.
It is not possible to output 192 kHz or 96 kHz digital audio signals from
this player’s
DIGITAL OUT terminal. The signals are automatically
converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output. Is HDMI Audio Out properly
set?
When listening to the sound from an HDMI OUT terminal, set HDMI
Audio Out to PCM (page 43).
Are Digital Output properly
set?
When listening to the sound from an DIGITAL OUT terminal, set
Digital Output to Re-encode or PCM (page 42).
Sound is fast or slow. When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables? When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player’s
HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing an audio
CD (CD-DA). Because of this, the sound output from components other
than the ones connected by an HDMI cable may be fast or slow. If this
happens, set
Control to Off (page 43).
After a disc is inserted,
Loading stays displayed and
playback does not start. Are there too many files
recorded on the disc? When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
 is displayed in file names,
etc. The characters that cannot be displayed on this player are displayed in
.
A message indicating low
memory appears while
playing a BD-ROM disc. • Connect a USB memory device (page 22).
• Erase the data stored on the connected USB memory device from
BUDA Setup (page 47).
Problem Check Remedy
BDP-52FD_UCXCNSM_IBD_EN.book Page 59 Friday, September 30, 2011 9:59 AM