Pioneer Blu-ray 3D Player BDP-52FD Manuel d'utilisation
Page 47
47
En
07
4
Input IP Address or Server Name.
Use the number buttons (0 to 9) to input the number if you
select IP address in step 3. Use
/ to move the cursor.
When Server Name is selected in step 3, use the number
buttons (0 to 9) to launch the software keyboard. Now use
/// to select characters and items, then press
ENTER to input.
5
Input Port Number.
Press
, then use the number buttons (0 to 9) to input
the number.
6
Press ENTER to set.
Displaying the network settings
Select and set Network Information Next
Screen.
Use
/ to select, then press ENTER.
The MAC address, IP address, subnet mask, default
gateway and DNS server (primary and secondary)
settings are displayed.
When
Auto Set IP Address is set to On, the values
obtained automatically are displayed.
Note
• “0.0.0.0” is displayed when each IP address has not
been set.
Testing the network connection
Select and set Network Connection Test
Start.
Use
/ to select, then press ENTER.
“Network is OK.” is displayed once the test is completed.
If any other message is displayed, check the connections
and/or settings (pages 22 and 43).
Changing to other language at
language setting
1
Select and set Language.
Use
/ to select, then press ENTER.
2
Select and set OSD, Audio, Subtitle or Menu
Use
/ to select, then press ENTER.
3
Select and set the desired language.
Use
/ to select, then press ENTER.
Note
• If a language not recorded on the BD/DVD is set, one
of the recorded languages is automatically selected
and played.
Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has been added to
BDs (data downloaded with the BD-LIVE function and
data used with the BONUSVIEW function) and
application data.
Caution
• Some time is required to erase the data.
• Do not unplug the power cord while data is being
erased.
1
Select and set BUDA
BUDA Setup.
Use
/ to select, then press ENTER.
2
Select and set Fmt buda.
Press
ENTER.
Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
About default password of this unit
The default password is “0000”.
• This unit might ask you to enter a password when you
change the password.
• If you reset this unit, your password is simultaneously
changed to the default setting.
1
Select and set Security
Change Password
Next Screen.
Use
/ to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) to input the number, then
press
ENTER to set.
Use
/ to move the cursor.
3
Re-input the password.
Use the number buttons (0 to 9) to input the number, then
press
ENTER to set.
Use
/ to move the cursor.
• To change the password, input the previously
registered password, then input the new password.
Note
• We recommend making a note of the password.
• If you have forgotten the password, reset the player to
the factory default setting, then register the password
again (page 49).
BDP-52FD_UCXCNSM_IBD_EN.book Page 47 Friday, September 30, 2011 9:59 AM