Useful tips when recording from mds to tape, Playing mds 29, Checking the track order – Sony MINIDISC MDS-JB920 Manuel d'utilisation

Page 29: Changing the track order

Advertising
background image

Playing MDs

29

EN

Useful Tips When Recording
From MDs to Tape

Inserting blank spaces while recording to
tape (Auto Space)

The Auto Space Function inserts a 3-second blank
space between each track while recording from MDs to
tapes, allowing you to use the AMS function during
later playback.

1

While the deck is stopped, press MENU/NO
twice to display “Setup Menu”.

2

Turn AMS to select “Setup 04”, then press AMS.

3

Turn AMS to select “Auto Space”, then press
AMS.

4

Press MENU/NO.

z

You can turn on the Auto Space Function using the
remote
Z

While the deck is stopped, press A.SPACE repeatedly
until “Auto Space” appears in the display.

To cancel Auto Space

Cancelling the function through menu operation on the
deck

1 Do Steps 1 and 2 in “Inserting blank spaces while

recording to tape” on this page.

2 Turn AMS to select “Auto Off”, then press AMS.
3 Press MENU/NO.

Cancelling the function using the remote Z

While the deck is stopped, p

ress A.SPACE repeatedly until

“Auto Off” appears.

Note

If the Auto Space Function is on while recording a selection
containing multiple track numbers, (for example, a medley
or symphony), blank spaces will be inserted within the
selection whenever the track number changes.

(Continued)

Checking the track order

While the deck is stopped and “PROGRAM” is on,
press DISPLAY/CHAR (or DISPLAY) several times.
The track numbers appear in the order they were
programmed as follow:
“/3 / 5 / 8 / 1 / 2/”

To check the rest of the track order

Turn AMS.
You can scroll the display to check all the track
numbers you programmed.

Changing the track order

You can change the order of the tracks in your
program before you start playing.

To

Do the following procedure
after Steps 1 and 2 in
“Creating Your Own
Program”:

Erase

Add a
track

Press 0 or ) until the track
number you want to erase
flashes, then press CLEAR.

Keep pressing CLEAR until all
programmed track numbers
disappear.

1 Press 0 until “0” flashes at

the left of the first track.

2 Do Steps 3 to 5 on page 28.

a track

the whole
program

to the
beginning of
the program

in the middle
of the program

1 Press 0 or ) until the

track which precedes the track
to be added flashes.

2 Press AMS so that “0” flashes,

then do Steps 3 to 5 on page
28.

1 Press 0 until “0” flashes at

the right of the last track.

2 Do Steps 3 to 5 on page 28.

to the end of
the program

Change a track in the
program

1 Press 0 or ) until the

track number you want to
change flashes.

2 Do Steps 3 to 5 on page 28.

P

p

0

)

r

§

·

AMS ±

MENU/NO

Advertising
Ce manuel est liée aux produits suivants: