Fading in and out (fader), Playing mds 30, Pausing after each track (auto pause) – Sony MINIDISC MDS-JB920 Manuel d'utilisation

Page 30: Fade-in playback, Fade-out playback, Press · or p, Cancelling the function using the remote z, Fader

Advertising
background image

Playing MDs

30

EN

Pausing after each track (Auto Pause)

When the Auto Pause Function is on, the deck pauses
after playing each track. Auto Pause is convenient
when recording single tracks or multiple,
nonconsecutive tracks.

Select “Auto Pause” instead of “Auto Space” in Step 3
on “Inserting blank spaces while recording to tape” on
page 29.

z

You can turn on the Auto Pause Function using the
remote
Z

While the deck is stopped, press A.SPACE repeatedly
until “Auto Pause” appears in the display.

To restart playback

Press · or P.

To cancel Auto Pause

Cancelling the function through a menu operation on the
deck

Do Steps 1 to 3 in “To cancel Auto Space” on page 29.

Cancelling the function using the remote Z

While the deck is stopped, press A.SPACE repeatedly until
“Auto Off” appears.

Note

If you turn off the deck or disconnect the AC power cord, the
deck will recall the last setting of the Auto Space and Auto
Pause Functions the next time you turn on the deck.

Fading In and Out (Fader)

You can gradually increase the playback level of the
signal output to the LINE (ANALOG ) OUT jacks and
the PHONES jack at the beginning of a playback (fade-
in playback) or gradually decrease the playback level
at the end of a playback (fade-out playback).
This function is convenient when, for example, you
want to start or end playback in the middle of the
track.

Fade-in playback

During playback pause, press FADER at the position
where you want fade-in playback to start.
Z in “Fade Z 3.2s” flashes and the deck performs fade-
in playback until the counter reaches to “0.0s”.

Fade-out playback

During playback, press FADER at the position where
you want fade-out playback to start.
z in “Fade z 3.2s” flashes and the deck performs fade-
out playback until the counter reaches “0.0s”.
The deck changes to playback pause when fade-out
playback finishes.

Note

The signal level output to the digital output connector does
not change.

z

You can set the duration of fade-in and fade-out
playback independently

Do Steps 1 to 5 in “You can set the duration of the fade-
in and fade-out recording independently” on page 20.

FADER

23

NUM

!

A

˜

B

22

CHAR

?

REPEAT

WRITE

CLEAR

21

Z

NAME

/

>

25

24

.

(

P.HOLD

A.SPACE

+

STANDBY

=

START

P

STOP

T.REC

MUSIC SYNC

REC-IT

25

,

)

M.SCAN

0

=

·

)

+

r

P

p

CD-SYNC

CD PLAYER

FADER

FADER

DIGITAL REC LEVEL
/ANALOG OUT LEVEL

Advertising
Ce manuel est liée aux produits suivants: