Sony MINIDISC MDS-JB920 - Manuel (Page 21)

21 EN
Recording on MDs
Recording the Current CD Track
(REC-IT Function) Z
This function lets you record a track on an MD while
listening to a CD.
This function operates only when you connect a Sony
CD player with a CONTROL A1 jack to the MD deck
using a control A1 cable. For details of CONTROL A1
connections, see page 6.
1
Set the source selector on the amplifier to CD.
2 Do Steps 2 to 5 in “Recording on an MD” on page
9 to prepare the deck for recording.
3
Press · on the CD player.
4
Press REC-IT when you hear a track you want to
record.
Play returns to the start of the track and recording
starts. The MD deck stops at the end of the track,
but CD playback continues from the next track.
To stop recording
Press p on the deck.
z
The deck copies CD text information as it is to the
MD
When the current CD has CD text, the track titles are
copied as the MD track titles.
z
When “No Connect” appears in the display
Check the control A1 cable connection and make sure
the CD player mode selector is set to CD1.
Notes
• The titles of the extremely short CD tracks may not be
copied to the MD.
• Text information may not be copied for some CDs.
While “TOC Writing” is flashing
Do not move the deck or pull out the AC power cord to
ensure the complete recording. The deck is currently
updating the MD Table of Contents (TOC).
REC-IT
NUM
!
A ˜ B
CHAR
?
REPEAT
WRITE CLEAR
NAME
/ > 25 (
P.HOLD
A.SPACE
+
STANDBY
=
START
P
STOP
T.REC MUSIC SYNC
REC-IT
)
M.SCAN
0
=
·
)
+ r
P p
CD-SYNC
CD PLAYER FADER
DIGITAL REC LEVEL
/ANALOG OUT LEVEL