Editing recorded mds, Notes on editing, Erasing recordings (erase function) – Sony MINIDISC MDS-JB920 Manuel d'utilisation

Page 39: Editing recorded mds 39, Erasing a single track

Advertising
background image

Editing Recorded MDs

39

EN

Editing Recorded MDs

Erasing Recordings (Erase
Function)

Do the procedures below to erase following:
• A single track
• All tracks

Erasing a single track

You can erase a track simply by specifying the
respective track number. When you erase a track, the
total number of tracks on the MD decreases by one and
all tracks following the erased one are renumbered.
Since erasing merely updates the TOC, there is no need
to record over material.

z

To avoid confusion when erasing multiple tracks,
you should proceed in order of high to low track
number to prevent the renumbering of tracks that
have not been erased yet.

Example: Erasing B

1

While the deck is stopped, playing, or pausing,
press MENU/NO to display “Edit Menu”.

2

Turn AMS until “Tr Erase ?” appears in the
display.

3

Press AMS or YES.
The display for erasing tracks appears and
playback of the displayed track starts.

(Continued)

Notes on Editing

You can edit the recorded tracks after recording, using
the following functions:
• Erase Function allows you to erase recorded tracks

simply by specifying the corresponding track
number.

• A-B Erase Function allows you to specify a portion

within a track to erase it.

• Divide Function allows you to divide tracks at

specified points so that you can quickly locate those
points afterwards, using the AMS function.

• Combine Function allows you to combine two

consecutive tracks into one.

• Move Function allows you to change the order of

tracks by moving a specific track to a track position
you want.

• Title Function allows you to create titles for your

recorded MDs and tracks.

• Undo Function allows you to cancel the last edit.

If “Protected” alternates with “C11” in the display

The deck could not edit because the record-protect slot
on the MD is open. Edit after closing the slot.

When “TOC” and “TOC Writing” flash in the display

Do not move the deck or pull out the AC power cord.
After editing, “TOC” lights continuously until you
eject the MD or turn off the deck. “TOC” and “TOC
Writing” flash while the deck is updating the TOC.
When the deck finishes updating the TOC, “TOC” goes
off.

1

2

3

4

1

2

3

A

B

C

D

A

C

D

Track
number

Erasing

B is erased

P

p

0

)

r

§

·

AMS ±

MENU/NO

YES

Advertising
Ce manuel est liée aux produits suivants: