Warning – Sony PCGA-DDRW2 Manuel d'utilisation

Page 2

Advertising
background image

2

GB

WARNING

To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
Dangerously high voltages are
present inside the unit. Do not
open the cabinet. Refer servicing
to qualified personnel only.

CAUTION - CLASS 3B VISIBLE
AND INVISIBLE LASER
RADIATION WHEN OPEN.
AVOID EXPOSURE TO THE
BEAM.

• Use this product only with the supplied AC adapter.
• To disconnect this product completely from mains

voltage, unplug the AC adapter.

• Make sure that the socket outlet is easily accessible.

For customers in the U.S.A.
Owner’s Record

The model number and the serial number are located
on the bottom of the drive. Record the serial number
in the space provided below. Refer to this number
whenever you call your Sony dealer regarding this
product.

Model No. PCGA-DDRW2
Serial No.

________________________________

FCC Notice

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference using one or more of the following
measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
subpart B of Part 15 of FCC.

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

For questions regarding your product or for the Sony
Customer Information Service Center nearest you,
call 1-888-476-6972 in the United States or 1-800-
961-7669 in Canada.

The number below is for FCC related matters only.

Declaration of Conformity

Trade Name:

SONY

Model No.:

PCGA-DDRW2

Responsible Party:

Sony Electronics Inc.

Address:

16450 W. Bernard Dr,
San Diego,
CA 92127 U.S.A

Telephone No.:

858-942-2230

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

Caution

The use of optical instruments with this product will
increase eye hazard.
As the laser beam used in this product is harmful to
eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.

For customers in Canada

T

his Class B digital apparatus complies with

Canadian ICES-003.

Before using the PCGA-DDRW2, be sure to read the
End User Software License Agreement that
accompanies it.
• Copyright laws prohibit reproducing the software or

the manual accompanying it in whole or in part, or
renting the software without the permission of the
copyright holder.

• In no event will SONY be liable for any financial

damages, or loss of profits, including claims made
by third parties, arising out of the use of the
software supplied with this drive.

• In the event a problem occurs with this product as a

result of defective manufacturing, SONY will
replace it. However, SONY bears no other
responsibility.

Advertising