Sony PCGA-DDRW2 - Manuel (Page 12)

12 GB
Connecting the Drive
The procedure for connecting this drive varies depending on the computer
you are using.
• If the notebook is equipped with a peripheral device DC OUT
connector (see page 14)
If the notebook is equipped with a peripheral device DC OUT connector,
use the supplied peripheral cable to connect the drive to the notebook. If
this method is used, power for the drive is supplied by the notebook,
allowing you to use the drive in locations without a power outlet.
If you use a Digital Video Camera Recorder, you can connect it to the
drive using the supplied i.LINK cable (see page 19).
• If the computer is not equipped with a peripheral device DC
OUT connector (see page 16)
If your computer is not equipped with a peripheral device DC OUT
connector, use the supplied i.LINK cable to connect the drive to the
computer. In this case, the supplied AC adapter and AC power cord must
be used.
If you use a Digital Video Camera Recorder, you can connect it to the
drive using an i.LINK cable available separately (see page 21).
i.LINK connector
Peripheral device
DC OUT connecor