JVC RX-D412B - Manuel (Page 49)

English
Operating other JVC
products
You can use the supplied remote control to operate not
only this receiver but also other JVC products.
• Refer also to the manuals supplied with the other products.
– Some JVC VCRs can accept two types of the control
signals—remote codes “A” and “B.” This remote control
can operate a VCR whose remote control code is set to “A.”
– Some JVC DVD recorders can accept four types of the
control signals. Select an appropriate code for your DVD
recorder (see page 48).
• To operate other products, aim the remote control directly
at the remote sensor on the target product.
7 TV
You can always perform the following operations:
TV VOL +/–: Adjust the volume on the TV.
TV/VIDEO: Change the input mode (either video
input or TV tuner) on the TV.
After pressing TV, you can perform the following operations
on the TV:
TV/SIRIUS : Turn on or off the TV.
CHANNEL +/–: Change the channel numbers.
1 – 9, 0, 100+ ( h10): Select the channel numbers.
RETURN (10): Switch between the previous channel
and the current channel.
7 VCR 7 SIRIUS Satellite Radio
You can always perform the following operation:
VCR : Turn on or off the VCR.
After pressing VCR, you can perform the following operations
on the VCR:
CHANNEL +/–: Change the channel numbers on the VCR.
1 – 9, 0: Select the channel numbers on the VCR.
3: Start playback.
7: Stop playback.
8: Pause playback. To release it, press 3.
¡: Fast-forward a tape.
1: Rewind a tape.
After pressing SIRIUS, you can perform the following
operations on the SIRIUS Satellite Radio:
TV/SIRIUS : Turn on or off the SIRIUS Satellite Radio.
CHANNEL +/–: Change the channel numbers on the
SIRIUS Satellite Radio.
SELECT: Select a highlighted item on the display
of the SIRIUS Satellite Radio.
CAT 9/( CAT: Change the category of the program.
MENU: Enter and exit from the Menu Option
screen of the SIRIUS Satellite Radio.
DISPLAY: Change the text size on the display of the
SIRIUS Satellite Radio.
1 – 9, 0, BAND: Store or tune in to the preset channel.
MEMORY: Store information on the display of the
SIRIUS Satellite Radio.
DIRECT: Enable access to channels of the SIRIUS
Satellite Radio directly by numeric
buttons.
PREV: Return to the previous channel.
NOTE
The remote control may not operate a SIRIUS Satellite Radio properly
if it is not KT-SR2000 (JVC SIRIUS Satellite Radio).
47
45-54_Others.indd 47 45-54_Others.indd 47 06.6.5 5:30:19 PM 06.6.5 5:30:19 PM